How Can I Tell if it's Silver or Silver Plated?
In the world of antiques, the line between silver and silver-plated can be deceptively thin. As dealers, we’ve all seen it—the moment someone brings in a cherished piece, convinced it’s solid silver, only for a closer examination to reveal otherwise. It’s an easy mistake to make; after all, silver-plated items were crafted to mimic their solid counterparts, often with impressive skill. But understanding the difference is essential, not just for assessing value but for appreciating the craftsmanship and context of each piece. Allow me to share the most reliable methods of identification, each with its own advantages and pitfalls, to help you discern the genuine article from its plated counterpart. You can, of course, reach out to DC Silver (www.dcsilver.com) for guidance about specific items.
1. Hallmark Examination
Method: Look for hallmarks or stamps. Sterling silver often bears marks like "925" or "Sterling," while plated items might carry terms such as "EPNS" (Electroplated Nickel Silver) or "Silverplate."
Pros: Non-invasive; highly reliable if the marks are legible and authentic.
Cons: Fakes and worn marks can mislead; some country marks can be obscure. Not all solid silver is marked at all.
2. Nitric Acid Testing
Method: Apply a silver-testing acid in a discreet area. Solid silver reacts distinctly compared to plated metals.
Pros: Highly accurate when done properly.
Cons: Requires skill and good judgment. Acid can scar silver if used improperly
3. Ultrasound or XRF Analysis
Method: High-tech approaches like X-ray fluorescence (XRF) precisely identify the metal’s composition.
Pros: Accurate and non-invasive.
Cons: Expensive and not easily accessible for casual collectors. XRF only penetrates so many microns into silver, so heavily plated items can give false readings.
4. Scratch Test
Method: Lightly scratch the surface in an inconspicuous area to see if a base metal is revealed.
Pros: Straightforward and effective.
Cons: Causes damage; unsuitable for valuable or antique pieces.
5. Magnet Test
Method: Use a magnet. Solid silver is non-magnetic, while plated items may use magnetic base metals like steel or nickel.
Pros: Quick, cheap, and non-invasive. Good for scanning a pile of jewelry.
Cons: Some plated items use non-magnetic metals, leading to false positives.
6. Weight Comparison
Method: You can conduct a specific gravity test on silver.
Pros: Non-invasive and useful for experienced dealers.
Cons: Technically can be complicated for some
7. Conductivity Test
Method: Test the thermal or electrical conductivity of the piece. Silver is an excellent conductor compared to most base metals.
Pros: Scientific and non-damaging.
Cons: Requires specialized equipment and expertise.
A Word of Wisdom
Each method has its place, depending on the piece and the stakes. For the novice, hallmarks and a good loupe are your best starting tools. But remember, even the best techniques can falter in the face of clever forgeries. Approach every shiny surface with both curiosity and caution—solid silver has a story worth preserving, and part of that story lies in knowing it for what it truly is.
Silver Polishing Tips
“Silver is meant to shine!” is a phrase that has echoed through hundreds of conversations on silver polishing. This elemental metal is much beloved in part for its ability to shine, brightening homes and moods wherever it is placed. And for many types of silver it is true. In this brief review, we will discuss some aspects of silver polishing, products, and other nuances of silver finish. If you are unsure of whether to polish or not yourself, it is recommended you consult a professional, as poor polishing materials and technique can cause dramatic damage.
What is tarnish?
As silver is exposed to air, its outermost surface binds to sulphur compounds in air and forms silver sulphide that give the silver a dark, eventually near black, finish. Additionally, many silver items are made of alloys that include other elements such as copper that similarly discolor. As an aside, these alloyed elements are the reason that, contrary to some beliefs, means that items made of gold too can tarnish. Most collectors for many types of pieces disdain the appearance of this silver sulphide, because it dulls the appearance of the item and diminishes its beauty.
Is patina the same as tarnish?
Patina may include tarnish, and in fact some selective tarnish can be desired in some pieces,. Patina, as the term is used in silver circles, refers to something else. Patina is the history of use of a piece that can be seen on its surface. Over time, a well-loved 18th century cup picks up fine surface scratches, micro dents, repairs, and engravings. All of these things are the patina. In many ways, patina represents the story of a piece of silver. Polishing to remove tarnish should endeavor not to remove the patina, because to remove patina is to remove the historical context of silver. Later in this discussion, I will discuss strategies to remove tarnish, but limit the damage to patina.
What you need to polish silver
A cotton makeup pad or a clean sponge. The texture of the polishing material impacts polishing. For a tougher job, you may find you need a slightly courser medium such as a soft piece of cloth. Fine cotton is generally indicated for removing tarnish. Cotton pads such as those used to remove cosmetics work well and are very soft (mostly avoiding adding needless scratches), but need to be replaced often. A nice piece of cotton, such as cloth used in making soft t-shirts can be used, but is rougher than cotton pads.
A good quality polish. When choosing a polish, consider first, what am I polishing? Different pieces require different polish. A piece of historically important silver held in a museum collection requires different treatment than a typical factory-made 1970’s spoon. In the museum conservation setting, in-house formulas are often used and, as an example, may consist of a water and calcium carbonate slurry, also called ‘precipitated chalk’. For items that are not considered historically important, other polishes can be considered. Herman’s is considered a top silver polish. Others commonly used by dealers and collectors are Twinkle, and for heavy tarnish on non-historical silver: Wright’s, and Hagerty. These last are more abrasive than the slurry method, Twinkle, or Herman’s. Serious collectors and dealers use multiple products because there is no “one size fits all”. Some polishes and methods are not recommended such as Simichrome or Maas. Toothpaste, baking soda, the aluminum foil method, and dips are recommended against.
Warm Water
A nice liquid soap
A wax or surface protectant such as Renaissance Wax or similar can be used on silver that is displayed.
What types of silver should not be polished by an amateur?
It depends on your skill level and ability. If you are new to silver, begin by practicing on the least significant pieces possible. For very little money, you can buy a few tarnished pieces of silver plate at a second hand store to practice before moving on to more important items.
Mixed metal silver items. These kinds of items can be quite difficult to polish. With areas that are plated with other metals and intentional patinas, even an advanced collector may seek professional consultation or polishing.
Mixed Metal Bowl by Gorham.
Oxidized silver or silver with intentional surface treatments that can be removed if improperly polished.
Removal of these intentionally darkened or colored surfaces can be very difficult to repair. Thus, polishing by inexpert hands can be a very costly, sometimes nearly irreparable mistake in the hands of a novice. If you have such an item and you are unsure, I urge you to reach out to a professional skilled in conservation. Some examples below in a Japanese mixed metal with applied patinas and shakudo Japanese cufflinks.
Gilding is a light layer of gold applied over silver for a variety of reasons that includes decoration as well as protecting silver from tarnish and from damage in such items as cups and salt cellars. The layer of gold is usually spare due to costs of the material and the process of gilding. Therefore, extreme and maximum care should be taken when dealing with tarnished gilt surfaces. If you can avoid polishing it, do. Sometimes, polishing gently with just cotton and no polish is an option. You can also use cotton and alcohol to clean gilt silver with pretty good results. Even with no added polish that is abrasive, proceed with caution and consider consulting a silversmith.
Porous Items Associated with Silver. Silver items are often accompanied by other materials like wood, bone, ivory, coral, pearl, and so on that are porous and should be cleaned with great care. The principle here is that the porous item must be protected from the polish and the precipitated tarnish as the item is being polished. If not, the items can be permanently stained. There are really two methods of doing this. One is to avoid touching the porous material. This take great care, but it can be done. The other is to seal the porous item and this can be achieved by the use of a wax in some cases before you begin to polish. It is very easy to cause extreme damage to these types of materials. If you have such an item and you are unsure, I urge you to reach out to a professional skilled in conservation.
Historically-Important Silver. I’ve used this term throughout this summary, but what does it mean? In my mind, there has been a growing rift between the value I place on silver that was created by a craftsman by hand versus items stamped out en masse in a factory. Making handmade silver like the Pedro Castillo forks and spoons shown in the photo (below left) from silver takes time, skill, and is difficult. To the contrary, factory silver like the various Kirk pieces in the photo (below right) is easily replaceable. When I think about silversmith-made items, additional care must be provided in how we polish, keep, and display them. To be candid, I would never hesitate to use the fastest most effective way to remove tarnish and even resurface mass-produced factory items. This is because they have little value beyond that of the silver content itself. In fact, there is a huge subset of the silver community dedicated to buying and melting down this kind of silver. We generally refer to these individual as “scrappers”. Some scrappers are careful not to melt historically important silver and some aren’t. But to a scrapper, the value of silver is solely based on weight. It’s a crude measure, akin to measuring the value of an oil painting by how much paint is on the canvas.
When you are dealing with a piece of pre-1850 silver or silver that has been produced by an identifiable silversmith or even any silver that has been handmade with a degree of skill by a silversmith, we are no longer just considering the item as a precious metal, because it has been elevated to art. And there are some pieces, such as colonial and Federal Period American silver that are nearly irreplaceable and scarce. Each example may be only one of a handful or even one of a kind. Likewise, in the case of a modern piece made by a silversmith who has died, each piece is a one of a kind.
Silver Plate and Old Sheffield Plate Items
These types of items are made from a base metal with a sometimes thin layer of silver overlaid. Over time with use and polishing, this layer can wear thin and expose the base metal. While most silver plated items are not very valuable, this becomes unsightly. And there is a subset of silver plated and OSP items that are very valuable. Either way, to keep these items looking their best, extra care should be given with polishing them.
Overpolishing that removes the historically important surface is a real problem with silver like this, because over time the odds of a piece of historical silver getting placed on a buffing machine go up across the decades and hands that own them. It can be a real temptation to return a piece of silver to new. Don’t give in to that temptation. Overpolishing can be caused by the wrong polish, or even worse buffing machines, dremels, or other means of automated polishing. When an object becomes overpolished, its desirability and collectibility will be greatly diminished. But it can
also be caused by too much pressure.
Techniques
Washing the Silver
There are pieces where submerging them in water can be quite damaging. Pieces with plaster for example, can't tolerate soaking in water. But for all solid silver pieces, you can wash them in very hot soapy water. A good quality unscented liquid castille soap is a great way to achieve this. You can remove a lot of initial dirt and oil before polishing with a good wash. An extra soft bristle toothbrush soaked in liquid soap is a useful tool during this step to remove debris and old polish in the nooks and crannies.
Lacquer
Lacquer is a protective coating applied to the outside of silver, usually in a spray form. It does prevent tarnishing of the silver in the places where it remains intact, but wherever it chips or peels, the silver will tarnish leaving an uneven surface. Worse, lacquer must be replaced periodically as it degrades and takes on an unsightly yellow cast over time. removing lacquer can be accomplished by at least two methods in solid silver pieces. Hollow pieces that need the lacquer replaced should go to a silversmith for treatment. Once technique is the use of acetone wiped on in a well-ventilated area. This will dissolve the lacquer. A second method is to boil a piece in a large pot of slowly boiling water. Given enough time, the lacquer will melt from the piece. Before attempting these methods, some thought should be given about the tolerance of the items to withstand these aggressive treatments. Once removed, a piece can be left with the bare metal once polished or it can be relacquered if necessary. Many museums have begun to abandon this once popular practice of lacquering.
Pressure
Pressure is a factor in polishing like the choice of the cloth described earlier. The more pressure you apply, the more destructive the polishing is. Start gently and work your way up in pressure recognizing that it doesn’t take much to alter valuable pieces by using too much pressure. You can always take a light swipe at a piece, wash it, dry it, evaluate it, and then go another round with more pressure. But you can’t undo having removed the surface or imparting deep scratches in the surface. Remember, the goal is to remove the tarnish but retain the patina. Getting a mirror finish is simply not necessary for most silver items.
The Stroke
Conventional wisdom is to polish the silver in circular strokes to minimize scratches left on the surface. Numerous authors have described this as the best manner for polishing. That said, if you aren't imparting scratches to the surface of the silver, this becomes less important.
Brief Summary of Don'ts
The number of products that should not be used on silver greatly outweighs those that should, but generally, high abrasion products, dips, and the aluminum foil method are among the worst. Tarn-X, jeweler's rouge, toothpaste, salt are all things that get recommended that are not good practice. If a product is described as a "metal polish", don't use it on decent silver.
There are likely some exceptions, but machining of silver whether with a dremel, a polishing wheel or some other means is not considered best practice and can quickly ruin valuable pieces of silver.
Don't overpolish.
Learn the significance of a piece before you dive in.
Cleaning Out Estate and Found a Silver Collection.. What Should I Do?
It happens all the time. Mom and Dad pass away and you never asked all the questions you should have about the silver and other antiques in the house. What can you do? What should you do? People around the world are faced with these questions every single day. Before you take those items to a charity shop, there are some things you should and should not do.
Lots of places are happy to look at your silver and there are pros and cons to each.
Clean-out companies: Many of these companies are predatory, charging families hundreds to haul away their junk-- as well as their priceless antiques and silver. I always think this is the worst option, but sometimes when all the family is far away and time is severely limited, this may be the best option. Just know, if they spot a gold coin collection or a midcentury Rolex in the mix, it's gone baby gone. And it would have paid for your plane ticket around the world to dispense of the collection differently.
Appraisers: Appraisers are useful, but you pay for their services, sometimes by the piece and sometimes by the hour. Appraisers will help you to not leave money on the table by identifying rare and valuable items that they are paid to appraise. The down side is that they can be expensive, the upside is that they could spot something worth thousands. Appraisers are kind of like accountants who pay for their services by saving you from making costly mistakes.
Pawn shops: The up side of a pawn shop is that if you have silver and if they're honest about the fact that it is silver, you'll walk away with cash on the spot. The down side is that you're going to give the pawn shop most of the money. They typically take as much as 90% of the value of a piece of silver and leave you with about 10%. I strongly advise you not to go to a pawn shop unless you are desperate and need to feed your kids or urgently pay for medical services.
Coin Shops: Coin shops are usually a little better than pawn shops, but sometimes not much. See above.
Refiner: Some refiners pay as much as 90% of the melt value of the pure silver contained in your item. Then they melt it down. This is fine when the silver is factory made silver from the 20th century. Most of this type of silver is only worth just slightly above its melt value. Large flatware sets or items made by big name manufacturers like Tiffany and Cartier are the exceptions. That said, silver that is older, made by hand by a silversmith should not get melted down by a refiner. This type of silver is almost always worth quite a bit more in its original state unless badly damaged. Even then, some silver is actually worth repairing and restoring before sale.
Take it to Auction: Some people opt to auction off silver collections. The auction house takes a cut, usually anywhere from 25-40%. And they charge a buyer's commission on the other side. Those are some of the reasons that prices at auction are typically lower-- even half what they are in a retail setting.
Consignment: Consignment is a way to sell. Most shops take around 20% of the sale price and the sale price usually drops over set intervals until items sell. This is an ok way to sell, but you may not get the price you are hoping.
Antique dealers: If you've got a friend in the business, this is a great route! Or, if you can find a dealer you trust, a great option. I recommend, if you are selling that you get a couple of opinions and estimates. Make sure to have clear pictures of items and their marks to show them. Don't waste their time though. Antique dealers are busy and they have long memories. Remember, even the best antique dealer cannot pay you anywhere close to full retail for anything they buy. They have to earn a living too. Antique dealers will usually pay 50% or sometimes less for the items they purchase. Antique dealers pay a lot of overhead, so they can never pay full value. It's helpful for antiques dealers if you have a price in mind when you come. Consider it a starting place to negotiate.
Do it yourself: If you have the the time, this is a great route. You can usually achieve about 70-85% of an item's value depending on how you sell it. For example, sites like Etsy or EBay (~18%) or other online venues typically take a percentage of every sale and charge listing fees. That's why you won't make 100%. Remember you have to take on the shipping costs as well-- and this can be expensive if you're shipping across the world to say Australia. It takes a lot longer-- sometimes many years to sell a silver collection. You need to take the time to learn how to clean and polish the silver carefully, and you need to learn how to read the marks on it, identify it, and value it. So many times, people will post an item on line that is so far above the market value that it never sells, or so low that they've left money on the table.
Keep it. If you have space for your parents' or grandparents' silver collection, just keep it. Use it, polish it, cherish it. Remember, as you keep it, it will get older, rarer, and more valuable. Owning silver is a great investment. If you don't believe me, go look up the prices on 18th century silver items. Your pieces will appreciate similarly as long as they are well cared for.
It's very easy to miss things worth hundreds and hundreds. Feel free to contact DC Silver if you need advice. It's possible I will offer to buy part or all of your collection paying more than many of the venues above.